|
Home --> TFA-R1 Rega Tonearm Rewire
|
TFA-R1 Rega Tonearm Rewire
|

|
|
We specialize in rewiring the Rega RB series tonearms. The Rega arms benefit greatly from a "one piece" rewire such as the TFA R1. Our TFA R1 rewire uses cryo treated Cardas 33 awg tonearm wire, Cardas PCC E cartridge clips and Eichmann Copper Bullet Plugs as the conductor and contact parts. We feel the cryo treatment enhances the performance of these parts and contributes to the overall performance of an already great design. The TFA R1 separates the ground from the signal conductors and only has solder connections at the clips and RCA's unlike the original Rega wiring scheme. The left and right channel conductors are formed into twisted pairs and routed through a PTFE conduit which has a spaced, tinned Copper shield. The external section of the TFA R1 is quite flexible and is compatible with most suspended table designs. Our rewire is not simply a "kit" which we install, each component of the rewire is meticulously hand crafted one at a time, then brought together to form what we believe to be the best Rega rewire currently available. We offer the rewire with external cabling up to a maximum of 4 feet with no minimum length. Cryo treated Vampire XLR's are optional terminations. Rewires are not a stock item, allow 2 weeks for construction after receipt of your arm. Cost of the rewire with a three foot external section RCA termination is $395.00. Prices will vary accordingly depending on actual length. If you would like more information on our rewire please give us a call drop us a line. UPDATE: We are now using black Aluminium shells on the Cryo Bullet Plugs of all RCA terminated rewires. We are also using a lighter gauge black wire as tonearm ground and as shunts for the shields. These improvements can be seen in the photo above and "RCA Detail" photo links below.
|
|
|
|
|